Extensive land use and geographic data at the tax lot level in comma-separated values (CSV) file format. The PLUTO files contain more than seventy fields derived from data maintained by city agencies.
All previously released versions of this data are available at BYTES of the BIG APPLE- Archive

2020 Census Blocks from the US Census for New York City. These boundary files are derived from the US Census Bureau's TIGER data products and have been geographically modified to fit the New York City base map. All previously released versions of this data are available at BYTES of the BIG APPLE- Archive.

2020 Census Tracts from the US Census for New York City. These boundary files are derived from the US Census Bureau's TIGER data products and have been geographically modified to fit the New York City base map. All previously released versions of this data are available at BYTES of the BIG APPLE- Archive.

2020 Census Tracts from the US Census for New York City. These boundary files are derived from the US Census Bureau's TIGER data products and have been geographically modified to fit the New York City base map. All previously released versions of this data are available at BYTES of the BIG APPLE- Archive.

Waterfront Public Access Areas (WPAAs) are privately owned waterfront zoning lots where publicly accessible open space is provided to and along the shoreline for public enjoyment, as shown on the Waterfront Access Map (WAM).

2020 Neighborhood Tabulation Areas (NTAs) are medium-sized statistical geographies for reporting Decennial Census and American Community Survey (ACS). 2020 NTAs are created by aggregating 2020 census tracts and nest within Community District Tabulation Areas (CDTA). NTAs were delineated with the need for both geographic specificity and statistical reliability in mind. Consequently, each NTA contains enough population to mitigate sampling error associated with the ACS yet offers a unit of analysis that is smaller than a Community District.

Though NTA boundaries and their associated names roughly correspond with many neighborhoods commonly recognized by New Yorkers, NTAs are not intended to definitively represent neighborhoods, nor are they intended to be exhaustive of all possible names and understandings of neighborhoods throughout New York City. Additionally, non-residential areas including large parks, airports, cemeteries, and other special areas are represented separately within this dataset and are assigned codes according to their type (See NTAType field). All previously released versions of this data are available at BYTES of the BIG APPLE- Archive.

2020 Neighborhood Tabulation Areas (NTAs) are medium-sized statistical geographies for reporting Decennial Census and American Community Survey (ACS). 2020 NTAs are created by aggregating 2020 census tracts and nest within Community District Tabulation Areas (CDTA). NTAs were delineated with the need for both geographic specificity and statistical reliability in mind. Consequently, each NTA contains enough population to mitigate sampling error associated with the ACS yet offers a unit of analysis that is smaller than a Community District.

Though NTA boundaries and their associated names roughly correspond with many neighborhoods commonly recognized by New Yorkers, NTAs are not intended to definitively represent neighborhoods, nor are they intended to be exhaustive of all possible names and understandings of neighborhoods throughout New York City. Additionally, non-residential areas including large parks, airports, cemeteries, and other special areas are represented separately within this dataset and are assigned codes according to their type (See NTAType field). All previously released versions of this data are available at BYTES of the BIG APPLE- Archive.

2020 Census Blocks from the US Census for New York City. These boundary files are derived from the US Census Bureau's TIGER data products and have been geographically modified to fit the New York City base map. All previously released versions of this data are available at BYTES of the BIG APPLE- Archive.

City Owned and Leased Properties (COLP) is published by the Department of City Planning (DCP) as required by chapter 204 of the City Charter. It includes the location and current use of all City-owned and leased properties. COLP is produced from an extract of the Integrated Property Information System (IPIS), a real estate database maintained by the Department of Citywide Administrative Services (DCAS). Except where indicated, the data provided is from IPIS.

Questions or feedback on errors within the City Owned and Leased Properties can be directed to DCAS Land Use Planning at (212) 386-0622 or RESPlanning311@dcas.nyc.gov.

2020 Census Blocks (water areas included) from the US Census for New York City. These boundary files are derived from the US Census Bureau's TIGER data products and have been geographically modified to fit the New York City base map. All previously released versions of this data are available at BYTES of the BIG APPLE- Archive.

The Building Elevation and Subgrade data contains New York City building centroids derived from the Department of Building's (DOB) February 26th, 2022 building footprint dataset. Each record contains a grade and first floor measurement for each building (recorded as feet above sea-level in the NADV88 vertical datum) and indicates if subgrade space exists. DCP contracted with an external data vendor to generate a single point, or centroid, that represented the location of the center of every building recorded in the DOB dataset. The dataset excluded the footprints of small accessory buildings such as sheds. Each row within the dataset represents one building centroid, and records the X and Y coordinates of that centroid in the NAD 1983 coordinate system.

This file shows the relationship between New York City’s 2020 census tracts, 2020 Neighborhood Tabulation Areas (NTAs), and Community District Tabulation Areas (CDTAs). 2020 census tracts nest within 2020 NTAs, and 2020 NTAs nest within CDTAs, so each census tract is listed only once. Note that CDTAs sometimes cross borough boundaries, and therefore will not add up to borough totals for the Bronx, Queens, and Manhattan. As they are nested within CDTAs, NTAs will likewise not add up to borough totals. Also note that census tracts in New York City’s water areas are excluded from this file.

Geodatabase of city-owned and leased properties and uses. COLP is a comprehensive list of uses on city owned and leased properties that includes geographic information as well as the type of use, agency and other related information.

All previously released versions of this data are available at BYTES of the BIG APPLE- Archive.

2020 Census Blocks (water areas included) from the US Census for New York City. These boundary files are derived from the US Census Bureau's TIGER data products and have been geographically modified to fit the New York City base map. All previously released versions of this data are available at BYTES of the BIG APPLE- Archive.

The Department of City Planning (DCP) created Community District Tabulation Areas (CDTAs) to closely approximate the 59 Community Districts of New York City for the purpose of reporting American Community Survey (ACS) data. CDTAs are built by aggregating whole 2020 census tracts. All previously released versions of this data are available at BYTES of the BIG APPLE- Archive.

2020 Census Tracts (water areas included) from the US Census for New York City. These boundary files are derived from the US Census Bureau's TIGER data products and have been geographically modified to fit the New York City base map. All previously released versions of this data are available at BYTES of the BIG APPLE- Archive.

The 2020 NYC Public Use Microdata Areas (PUMAs) are statistical geographic areas defined for the dissemination of 2020 Public Use Microdata Sample (PUMS) data. PUMAs have a minimum population of 100,000, are aggregated from census tracts, and approximate Community Districts (CDs), or combinations of CDs (There are 59 CDs and only 55 NYC PUMAs because of such combinations). These boundary files are derived from the US Census Bureau's TIGER project and have been geographically modified to fit the New York City base map.

2020 Census Tracts (water areas included) from the US Census for New York City. These boundary files are derived from the US Census Bureau's TIGER data products and have been geographically modified to fit the New York City base map. All previously released versions of this data are available at BYTES of the BIG APPLE- Archive.

The Department of City Planning (DCP) processes land use applications submitted by City or other public agencies and other (private) applicants. This data set provides information on land use applications, specifically the project tracking and description data related to approximately 30,000 projects since the late 1970s.

ZAP project data appears on NYC Planning - Zoning Application Portal Search. It includes data migrated from the prior applications tracking system (LUCATS) and covers all projects that have been "Noticed" (that they will appear before the City Planning Commission in 30 or more days for Certification as complete for the ULURP process to begin) or Filed (a CEQR or Land Use application has been formally submitted to the Department for review) through completion (approval, disapproval, withdrawal, or termination). For more information on the land use and environmental review application process see: Application Process Overview

You can explore this data in the Zoning Application Portal

To report data errors or for questions, email zap_feedback_dl@planning.nyc.gov.

The Department of City Planning (DCP) created Community District Tabulation Areas (CDTAs) to closely approximate the 59 Community Districts of New York City for the purpose of reporting American Community Survey (ACS) data. CDTAs are built by aggregating whole 2020 census tracts. All previously released versions of this data are available at BYTES of the BIG APPLE- Archive.

The Department of City Planning (DCP) processes land use applications submitted by City or other public agencies and other (private) applicants. This data set provides information on land use applications, specifically the project tracking and description data related to approximately 30,000 projects since the late 1970s.

ZAP project data appears on NYC Planning - Zoning Application Portal Search. It includes data migrated from the prior applications tracking system (LUCATS) and covers all projects that have been "Noticed" (that they will appear before the City Planning Commission in 30 or more days for Certification as complete for the ULURP process to begin) or Filed (a CEQR or Land Use application has been formally submitted to the Department for review) through completion (approval, disapproval, withdrawal, or termination). For more information on the land use and environmental review application process see: Application Process Overview

You can explore this data in the Zoning Application Portal

To report data errors or for questions, email zap_feedback_dl@planning.nyc.gov.

The Digital City Map (DCM) data represents street lines and other features shown on the City Map, which is the official street map of the City of New York. The City Map consists of 5 different sets of maps, one for each borough, totaling over 8000 individual paper maps. The DCM datasets were created in an ongoing effort to digitize official street records and bring them together with other street information to make them easily accessible to the public. The Digital City Map (DCM) is comprised of seven datasets; Digital City Map, Street Center Line, City Map Alterations, Arterial Highways and Major Streets, Street Name Changes (areas), Street Name Changes (lines), and Street Name Changes (points).

All of the Digital City Map (DCM) datasets are featured on the Streets App

All previously released versions of this data are available at BYTES of the BIG APPLE- Archive

Updates for this dataset, along with other multilayered maps on NYC Open Data, are temporarily paused while they are moved to a new mapping format. Please visit https://www.nyc.gov/site/planning/data-maps/open-data/dwn-digital-city-map.page to utilize this data in the meantime.

Access points for saltwater fishing sites in NYC, that are shown on the Waterfront Access Map (WAM). Please see the NYS Dept. of Environmental Conservation (DEC) website for current regulations and fishing tips.

The Digital City Map (DCM) data represents street lines and other features shown on the City Map, which is the official street map of the City of New York. The City Map consists of 5 different sets of maps, one for each borough, totaling over 8000 individual paper maps. The DCM datasets were created in an ongoing effort to digitize official street records and bring them together with other street information to make them easily accessible to the public. The Digital City Map (DCM) is comprised of seven datasets; Digital City Map, Street Center Line, City Map Alterations, Arterial Highways and Major Streets, Street Name Changes (areas), Street Name Changes (lines), and Street Name Changes (points).

All of the Digital City Map (DCM) datasets are featured on the Streets App

All previously released versions of this data are available at BYTES of the BIG APPLE- Archive

City, State, and Federally owned public parks and facilities that provide waterfront parkland and open space for public enjoyment, as shown on the Waterfront Access Map (WAM).