5 结果
筛选由...
筛选
5 结果
筛选由
标签 > hpwes
清除所有
IMPORTANT! PLEASE READ DISCLAIMER BEFORE USING DATA. To reduce the energy burden on income-qualified households within New York State, NYSERDA offers the EmPower New York (EmPower) program, a retrofit program that provides cost-effective electric reduction measures (i.e., primarily lighting and refrigerator replacements), and cost-effective home performance measures (i.e., insulation air sealing, heating system repair and replacments, and health and safety measures) to income qualified homeowners and renters. Home assessments and implementation services are provided by Building Performance Institute (BPI) Goldstar contractors to reduce energy use for low income households. This data set includes energy efficiency projects completed since January 2018 for households with income up to 60% area (county) median income.
D I S C L A I M E R: Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, and First Year Energy Savings $ Estimate represent contractor reported savings derived from energy modeling software calculations and not actual realized energy savings. The accuracy of the Estimated Annual kWh Savings and Estimated Annual MMBtu Savings for projects has been evaluated by an independent third party. The results of the impact analysis indicate that, on average, actual savings amount to 54 percent of the Estimated Annual kWh Savings and 70 percent of the Estimated Annual MMBtu Savings. The analysis did not evaluate every single project, but rather a sample of projects from 2007 and 2008, so the results are applicable to the population on average but not necessarily to any individual project which could have over or under achieved in comparison to the evaluated savings. The results from the impact analysis will be updated when more recent information is available. Some reasons individual households may realize savings different from those projected include, but are not limited to, changes in the number or needs of household members, changes in occupancy schedules, changes in energy usage behaviors, changes to appliances and electronics installed in the home, and beginning or ending a home business. For more information, please refer to the Evaluation Report published on NYSERDA’s website at: https://www.nyserda.ny.gov/-/media/Files/Publications/PPSER/Program-Evaluation/2012ContractorReports/2012-EmPower-New-York-Impact-Report.pdf.
This dataset includes the following data points for projects completed after January 1, 2018: Reporting Period, Project ID, Project County, Project City, Project ZIP, Gas Utility, Electric Utility, Project Completion Date, Total Project Cost (USD), Pre-Retrofit Home Heating Fuel Type, Year Home Built, Size of Home, Number of Units, Job Type, Type of Dwelling, Measure Type, Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, First Year Modeled Energy Savings $ Estimate (USD).
How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.
已更新
January 22 2024
查看
2,056
IMPORTANT! PLEASE READ DISCLAIMER BEFORE USING DATA. The Residential Existing Homes Program is a market transformation program that uses Building Performance Institute (BPI) Goldstar contractors to install comprehensive energy-efficient improvements. The program is designed to use building science and a whole-house approach to reduce energy use in the State’s existing one-to-four family and low-rise multifamily residential buildings and capture heating fuel and electricity-related savings. The Program provides income-based incentives, including an assisted subsidy for households with income up to 80% of the State or Median County Income, whichever is higher to install eligible energy efficiency improvements including building shell measures, high efficiency heating and cooling measures, ENERGY STAR appliances and lighting.
D I S C L A I M E R: Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, and First Year Energy Savings $ Estimate represent contractor reported savings derived from energy modeling software calculations and not actual realized energy savings. The accuracy of the Estimated Annual kWh Savings and Estimated Annual MMBtu Savings for projects has been evaluated by an independent third party. The results of the impact analysis indicate that, on average, actual savings amount to 35 percent of the Estimated Annual kWh Savings and 65 percent of the Estimated Annual MMBtu Savings. The analysis did not evaluate every single project, but rather a sample of projects from 2007 and 2008, so the results are applicable to the population on average but not necessarily to any individual project which could have over or under achieved in comparison to the evaluated savings. The results from the impact analysis will be updated when more recent information is available. Many factors influence the degree to which estimated savings are realized, including proper calibration of the savings model and the savings algorithms used in the modeling software. Some reasons individual households may realize savings different from those projected include, but are not limited to, changes in the number or needs of household members, changes in occupancy schedules, changes in energy usage behaviors, changes to appliances and electronics installed in the home, and beginning or ending a home business. Beginning November 2017, the Program requires the use of HPXML-compliant modeling software tools and data quality protocols have been implemented to more accurately project savings. For more information, please refer to the Evaluation Report published on NYSERDA’s website at: http://www.nyserda.ny.gov/-/media/Files/Publications/PPSER/Program-Evaluation/2012ContractorReports/2012-HPwES-Impact-Report-with-Appendices.pdf.
The New York Residential Existing Homes (One to Four Units) dataset includes the following data points for projects completed during Green Jobs Green-NY, beginning November 15, 2010: Home Performance Project ID, Home Performance Site ID, Project County, Project City, Project Zip, Gas Utility, Electric Utility, Project Completion Date, Customer Type, Low-Rise or Home Performance Indicator, Total Project Cost (USD), Total Incentives (USD), Type of Program Financing, Amount Financed Through Program (USD), Pre-Retrofit Home Heating Fuel Type, Year Home Built, Size of Home, Volume of Home, Number of Units, Measure Type, Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, First Year Energy Savings $ Estimate (USD), Homeowner Received Green Jobs-Green NY Free/Reduced Cost Audit (Y/N).
D I S C L A I M E R: Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, and First Year Energy Savings $ Estimate represent contractor reported savings derived from energy modeling software calculations and not actual realized energy savings. The accuracy of the Estimated Annual kWh Savings and Estimated Annual MMBtu Savings for projects has been evaluated by an independent third party. The results of the impact analysis indicate that, on average, actual savings amount to 35 percent of the Estimated Annual kWh Savings and 65 percent of the Estimated Annual MMBtu Savings. The analysis did not evaluate every single project, but rather a sample of projects from 2007 and 2008, so the results are applicable to the population on average but not necessarily to any individual project which could have over or under achieved in comparison to the evaluated savings. The results from the impact analysis will be updated when more recent information is available. Many factors influence the degree to which estimated savings are realized, including proper calibration of the savings model and the savings algorithms used in the modeling software. Some reasons individual households may realize savings different from those projected include, but are not limited to, changes in the number or needs of household members, changes in occupancy schedules, changes in energy usage behaviors, changes to appliances and electronics installed in the home, and beginning or ending a home business. Beginning November 2017, the Program requires the use of HPXML-compliant modeling software tools and data quality protocols have been implemented to more accurately project savings. For more information, please refer to the Evaluation Report published on NYSERDA’s website at: http://www.nyserda.ny.gov/-/media/Files/Publications/PPSER/Program-Evaluation/2012ContractorReports/2012-HPwES-Impact-Report-with-Appendices.pdf.
The New York Residential Existing Homes (One to Four Units) dataset includes the following data points for projects completed during Green Jobs Green-NY, beginning November 15, 2010: Home Performance Project ID, Home Performance Site ID, Project County, Project City, Project Zip, Gas Utility, Electric Utility, Project Completion Date, Customer Type, Low-Rise or Home Performance Indicator, Total Project Cost (USD), Total Incentives (USD), Type of Program Financing, Amount Financed Through Program (USD), Pre-Retrofit Home Heating Fuel Type, Year Home Built, Size of Home, Volume of Home, Number of Units, Measure Type, Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, First Year Energy Savings $ Estimate (USD), Homeowner Received Green Jobs-Green NY Free/Reduced Cost Audit (Y/N).
How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.
已更新
January 22 2024
查看
7,924
IMPORTANT! PLEASE READ DISCLAIMER BEFORE USING DATA. The Residential Existing Homes Program is a market transformation program that uses Building Performance Institute (BPI) Goldstar contractors to install comprehensive energy-efficient improvements. The program is designed to use building science and a whole-house approach to reduce energy use in the State’s existing one-to-four family and low-rise multifamily residential buildings and capture heating fuel and electricity-related savings. The Program provides income-based incentives, including an assisted subsidy for households with income up to 80% of the State or Median County Income, whichever is higher to install eligible energy efficiency improvements including building shell measures, high efficiency heating and cooling measures, ENERGY STAR appliances and lighting.
D I S C L A I M E R: Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, and First Year Energy Savings $ Estimate represent contractor reported savings derived from energy modeling software calculations and not actual realized energy savings. The accuracy of the Estimated Annual kWh Savings and Estimated Annual MMBtu Savings for projects has been evaluated by an independent third party. The results of the impact analysis indicate that, on average, actual savings amount to 35 percent of the Estimated Annual kWh Savings and 65 percent of the Estimated Annual MMBtu Savings. The analysis did not evaluate every single project, but rather a sample of projects from 2007 and 2008, so the results are applicable to the population on average but not necessarily to any individual project which could have over or under achieved in comparison to the evaluated savings. The results from the impact analysis will be updated when more recent information is available. Many factors influence the degree to which estimated savings are realized, including proper calibration of the savings model and the savings algorithms used in the modeling software. Some reasons individual households may realize savings different from those projected include, but are not limited to, changes in the number or needs of household members, changes in occupancy schedules, changes in energy usage behaviors, changes to appliances and electronics installed in the home, and beginning or ending a home business. Beginning November 2017, the Program requires the use of HPXML-compliant modeling software tools and data quality protocols have been implemented to more accurately project savings. For more information, please refer to the Evaluation Report published on NYSERDA’s website at: http://www.nyserda.ny.gov/-/media/Files/Publications/PPSER/Program-Evaluation/2012ContractorReports/2012-HPwES-Impact-Report-with-Appendices.pdf.
The New York Residential Existing Homes (One to Four Units) dataset includes the following data points for projects completed during Green Jobs Green-NY, beginning November 15, 2010: Home Performance Project ID, Home Performance Site ID, Project County, Project City, Project Zip, Gas Utility, Electric Utility, Project Completion Date, Customer Type, Low-Rise or Home Performance Indicator, Total Project Cost (USD), Total Incentives (USD), Type of Program Financing, Amount Financed Through Program (USD), Pre-Retrofit Home Heating Fuel Type, Year Home Built, Size of Home, Volume of Home, Number of Units, Measure Type, Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, First Year Energy Savings $ Estimate (USD), Homeowner Received Green Jobs-Green NY Free/Reduced Cost Audit (Y/N).
D I S C L A I M E R: Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, and First Year Energy Savings $ Estimate represent contractor reported savings derived from energy modeling software calculations and not actual realized energy savings. The accuracy of the Estimated Annual kWh Savings and Estimated Annual MMBtu Savings for projects has been evaluated by an independent third party. The results of the impact analysis indicate that, on average, actual savings amount to 35 percent of the Estimated Annual kWh Savings and 65 percent of the Estimated Annual MMBtu Savings. The analysis did not evaluate every single project, but rather a sample of projects from 2007 and 2008, so the results are applicable to the population on average but not necessarily to any individual project which could have over or under achieved in comparison to the evaluated savings. The results from the impact analysis will be updated when more recent information is available. Many factors influence the degree to which estimated savings are realized, including proper calibration of the savings model and the savings algorithms used in the modeling software. Some reasons individual households may realize savings different from those projected include, but are not limited to, changes in the number or needs of household members, changes in occupancy schedules, changes in energy usage behaviors, changes to appliances and electronics installed in the home, and beginning or ending a home business. Beginning November 2017, the Program requires the use of HPXML-compliant modeling software tools and data quality protocols have been implemented to more accurately project savings. For more information, please refer to the Evaluation Report published on NYSERDA’s website at: http://www.nyserda.ny.gov/-/media/Files/Publications/PPSER/Program-Evaluation/2012ContractorReports/2012-HPwES-Impact-Report-with-Appendices.pdf.
The New York Residential Existing Homes (One to Four Units) dataset includes the following data points for projects completed during Green Jobs Green-NY, beginning November 15, 2010: Home Performance Project ID, Home Performance Site ID, Project County, Project City, Project Zip, Gas Utility, Electric Utility, Project Completion Date, Customer Type, Low-Rise or Home Performance Indicator, Total Project Cost (USD), Total Incentives (USD), Type of Program Financing, Amount Financed Through Program (USD), Pre-Retrofit Home Heating Fuel Type, Year Home Built, Size of Home, Volume of Home, Number of Units, Measure Type, Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, First Year Energy Savings $ Estimate (USD), Homeowner Received Green Jobs-Green NY Free/Reduced Cost Audit (Y/N).
How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.
已更新
January 22 2024
查看
3,482
IMPORTANT! PLEASE READ DISCLAIMER BEFORE USING DATA. This dataset backcasts estimated modeled savings for a subset of 2007-2012 completed projects in the Home Performance with ENERGY STAR® Program against normalized savings calculated by an open source energy efficiency meter available at https://www.openee.io/. Open source code uses utility-grade metered consumption to weather-normalize the pre- and post-consumption data using standard methods with no discretionary independent variables. The open source energy efficiency meter allows private companies, utilities, and regulators to calculate energy savings from energy efficiency retrofits with increased confidence and replicability of results. This dataset is intended to lay a foundation for future innovation and deployment of the open source energy efficiency meter across the residential energy sector, and to help inform stakeholders interested in pay for performance programs, where providers are paid for realizing measurable weather-normalized results. To download the open source code, please visit the website at https://github.com/openeemeter/eemeter/releases
D I S C L A I M E R:
Normalized Savings using open source OEE meter. Several data elements, including, Evaluated Annual Elecric Savings (kWh), Evaluated Annual Gas Savings (MMBtu), Pre-retrofit Baseline Electric (kWh), Pre-retrofit Baseline Gas (MMBtu), Post-retrofit Usage Electric (kWh), and Post-retrofit Usage Gas (MMBtu) are direct outputs from the open source OEE meter.
Normalized Savings using open source OEE meter. Several data elements, including, Evaluated Annual Elecric Savings (kWh), Evaluated Annual Gas Savings (MMBtu), Pre-retrofit Baseline Electric (kWh), Pre-retrofit Baseline Gas (MMBtu), Post-retrofit Usage Electric (kWh), and Post-retrofit Usage Gas (MMBtu) are direct outputs from the open source OEE meter.
Home Performance with ENERGY STAR® Estimated Savings. Several data elements, including, Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, and Estimated First Year Energy Savings represent contractor-reported savings derived from energy modeling software calculations and not actual realized energy savings. The accuracy of the Estimated Annual kWh Savings and Estimated Annual MMBtu Savings for projects has been evaluated by an independent third party. The results of the Home Performance with ENERGY STAR impact analysis indicate that, on average, actual savings amount to 35 percent of the Estimated Annual kWh Savings and 65 percent of the Estimated Annual MMBtu Savings. For more information, please refer to the Evaluation Report published on NYSERDA’s website at: http://www.nyserda.ny.gov/-/media/Files/Publications/PPSER/Program-Evaluation/2012ContractorReports/2012-HPwES-Impact-Report-with-Appendices.pdf.
This dataset includes the following data points for a subset of projects completed in 2007-2012: Contractor ID, Project County, Project City, Project ZIP, Climate Zone, Weather Station, Weather Station-Normalization, Project Completion Date, Customer Type, Size of Home, Volume of Home, Number of Units, Year Home Built, Total Project Cost, Contractor Incentive, Total Incentives, Amount Financed through Program, Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, Estimated First Year Energy Savings, Evaluated Annual Electric Savings (kWh), Evaluated Annual Gas Savings (MMBtu), Pre-retrofit Baseline Electric (kWh), Pre-retrofit Baseline Gas (MMBtu), Post-retrofit Usage Electric (kWh), Post-retrofit Usage Gas (MMBtu), Central Hudson, Consolidated Edison, LIPA, National Grid, National Fuel Gas, New York State Electric and Gas, Orange and Rockland, Rochester Gas and Electric.
How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.
已更新
February 4 2021
查看
1,324
IMPORTANT! PLEASE READ DISCLAIMER BEFORE USING DATA. This data set includes modeled savings for specific energy efficiency measures by measure category and measure sub-category for a subset of 2007-2012 completed projects in the Residential Existing Homes (One to Four Units) Energy Efficiency Projects with Income-based Incentives by Customer Type: Beginning 2010 (https://data.ny.gov/d/assk-vu73) dataset. It is anticipated that this dataset will be most helpful when used in conjunction with the project-level dataset, Residential Existing Homes (one to Four Units) Energy Efficiency Meter Evaluated Project Data: 2007-2012 (https://data.ny.gov/d/5vqm-4rpf). When used together these datasets backcast estimated measure-level savings and project-level estimated (modeled) savings against normalized savings calculated by an open source energy efficiency meter available at: https://www.openee.io/.
This dataset includes the following data points for a subset of projects completed in 2007-2012: Project ID, Measure ID, Measure Category, Measure Sub-category, Measure Cost ($), Measure Quantity, Measure Life, Measure SIR, Measure Incremental Energy Savings (MMBtu), Measure Estimated Annual Electric Savings (kWh), Measure Estimated Annual Energy Savings (MMBtu), Measure Estimated Annual Natural Gas Savings (MMBtu), Measure Estimated Oil Savings (MMBtu), Measure Estimated Propane Savings (MMBtu), Measure Estimated Coal Savings (MMBtu), Measure Estimated Kerosene Savings (MMBtu), Measure Estimated Pellets Savings (MMBtu), Measure Estimated Wood Savings (MMBtu).
How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.
已更新
February 4 2021
查看
1,123
显示第1-5条记录,总共5条记录